What is the fish meal machine price?
ژوئن 27, 2022
Fishmeal sieving machine shipped to Norway
نوامبر 29, 2022Congratulations! Shuliy 50t/24h fishmeal making machine was ordered by a Sri Lankan customer. Our fishmeal machine can produce highly nutritious fishmeal with fish, shrimp, and other raw materials. Fish meal is widely used to make feed for aquatic animals, livestock, fur animals, etc. Fish meal is also a good source of minerals, which can promote production and improve feed utilization.
Why did the Sri Lankan customer buy 50t/24h fishmeal making machine?
- Rich raw material resources. Sri Lanka is surrounded by the sea and rich in fish resources. The raw materials for making fishmeal are sufficient, and a large number of raw materials can be obtained at a low price. The cost is low.
- Fish meal is widely used. The fish meal produced by processing can be used to produce various feeds such as aquatic products and poultry, which can better promote the absorption and growth of animals. For the Sri Lankan customer, the profit margin is huge.
- The market demand gap is large. Through market research, it is found that very little fish meal is produced in Sri Lanka, and there is still a large market gap in this regard. Whether sold locally or exported, the income is very considerable.
- Own a company. This Sri Lankan customer has his own company and long-term partner in the local area. After comprehensive consideration, he decided to buy the fishmeal making machine.
The detailed communication process of purchasing fishmeal making machine
When the customer contacted us, he said he wanted a fish meal dryer. Through further detailed communication with our sales manager Apple, she knew that he wanted a complete set of machines that can produce fishmeal. Therefore, Apple further asked what the raw material was. After the customer said it was fish, she asked again whether it was more than 10cm. If it exceeds 10CM, it needs to be crushed before the next process.
Later, the Sri Lankan customer, Apple, and his partner jointly set up a group to discuss further information about the fishmeal making machine. Apple recommended a 50t/24h fishmeal machine according to their desired production scale and sent a detailed quotation by email for customers’ reference. After reading it, the Sri Lankan customer discussed the modification of the screw conveyor, the addition of accessories, and the modification of the pro forma invoice of the fishmeal machine. Finally, a 50t/24h fishmeal machine was determined.
Details of purchased fishmeal making machine equipment
| Item | Fishmeal machine specification | Quantity(set) | Power(kW) |
| Fishmeal making machine | |||
Fresh crusher | ● tooth knife with wear-resistant alloy steel 40Cr ● Capacity ：3000-5000kg/h ● dimension : 1700X1200X1200mm; With crusher operation, material storage platform, material Q235B, size 2 * 3M, can store 500kg raw material. Weight: 2000kg | 1 | 11 |
| Cooking machine | Φ510X8000 Main configuration and parameters ● The cylinder is made of Φ510×10 spiral steel pipe; ● heating blades, the inner and outer heating cylinders are made of Q345 steel plate; ● The top cover is made of stainless steel; ● With brand name rotary joints and stainless steel hoses; ● integral bracket to increase the operating platform; ● dimension:8500×700×1700m ● Weight:4800kg | 1 | 5 Frequency control |
| Press | Φ200-2 Main configuration and parameters ● It adopts twin-screw extrusion, which has ideal pressing effect and good degreasing effect; ● The screw blade is made of 14mm and made of 16MnR. ● According to the characteristics of raw fish, special compression ratio design; ● The gearbox adopts ZQ650 unit; ● The outer casing and door of the press are made of SUS304 stainless steel; ● New integrated machine base for easy installation; ● Dimensions: 4.6 × 1.0 × 1.5m; ● Weight:4500kg | 1 | 15 Frequency control |
| Steam dryer | Φ1400×8000 Main configuration and parameters ● The main shaft is made of Φ426X25 seamless pipe. The material is 20# steel, which is filled with steam to increase the heat exchange area of the equipment. ● The inner cylinder of the dryer is made of material Q345R, the thickness of the cylinder is δ=18mm, and the outer jacket is made of Q245R carbon steel, the thickness of the plate is δ=12mm; ● It adopts coil-type drying, the coil Φ76×6 is made of seamless steel pipe, and the material Q235B has high drying efficiency. ● There is a copy board on the heating plate inside the tank, using wear-resistant Q345 (manganese plate), the thickness of the plate is δ=10mm, pushing the material evenly forward; ● The gearbox adopts ZLY280 unit; ● The outer cover of the dryer is made of SUS304 stainless steel, δ=2.0mm; ● The equipment adopts an outer jacket type structure with a spacing of 60mm between the inner and outer layers; ● Insulation material is made of aluminum silicate, made of stainless steel SUS304, thickness δ=0.7mm; ● With brand name rotary joints and stainless steel hoses; ● Dimensions: 9000 × 2000 × 2400mm; ● Weight:19000kg | 1 | 37 |
| Roller cooler | Φ1000×6000 Main configuration and parameters ● The bracket adopts Q235B, and the shell is made of Q235B steel, δ=6mm; ● Cooling and screening the materials and discharging them in two stages; ● Adopt two-stage structure, cooling in the front section and screening in the back section; ● Equipped with dust collector Φ800×1600, made of SUS304 stainless steel, δ=2.0mm; ● induced draft fan 4-72, 3.6A power: 3kw, made of SUS304 stainless steel; ● Dimensions: 8.0X1.4X1.8m; ● Weight:7000kg | 1 | 3+3 Frequency control |
| Horizontal screw sedimentation centrifuge | LWS400×1800 three-phase Main configuration and parameters ● Effectively separate grease solids and water to improve oil separation effect and quality. ●The parts in contact with the materials are made of 304 stainless steel; ● The separation amount is 4-5t/h, and the frequency conversion motor is convenient for control. ● The maximum drum speed is 3600r/min ● Maximum profit factor: 3000G ●The main motor power is 22KW, and the auxiliary machine is 11kw (for the main engine during operation) ●Dimensions 3590mm × 1025mm × 1205mmm Weight:3000kg | 1 | 22 |
| Equipment installation materials | ● Steam pipeline, water pipeline, instrument, valve ● Equipment connection basis, etc.; operating platform. ● Insulation rock wool of steam pipes; The equipment and control cabinet are connected with wires and cables | 1 | / |
| Electrical control cabinet | ● The electrical components are used in Chint, and the performance is reliable; ● Electric control box operation indicator; Electric control box adopts front opening door for easy inspection and maintenance. | 1 | / |
| Screw conveyor | GX Φ300×4500 Main configuration and parameters ● The outer casing is made of SUS304 stainless steel, δ=4mm, the blade is made of SUS304 stainless steel, δ=4mm; ● Approach: send the solids separated from the solid-liquid separator to the dryer ● Outer size: 4.5X0.35X0.35m; ● Weight:300kg | 3 | 3 for each one |